Tuesday, November 30, 2010

Methods of home video distribution

It 's a fact that our lives are ruled out, slowly but surely from the TV, not what we do is controlled by the TV, but there is always a feature of modern homes there is a TV in every room.

For example, the authors have located the house a total of 4 TV;

Hdmi Tv

In the room - apparently.
In the kitchen - to watch the cooking or cleaning.
In the bedroom - he saw in the morning and late evening.
In children - because they do not want the same Clockwhat we do.
Methods of home video distribution
TV's are driven by four types of content, the sky is free view, DVD and Blu-ray all in different locations around the house.
It 'obvious that it would be desirable to all content on the TV all depending on the room with a view of the beholder. There are many ways to do this and this article was written to discuss the pros and cons of each.
Wireless Video Sender (No Hi-Def)
This is always to try the method that people initiallyconflicting results. They are usually of a transmitter and receiver to the source (single) connected via Scart, and then wirelessly transmits video and audio to the receiver (the TV with the remote re-connected through SCART) is produced. There are two variants of the use of wireless video sender two separate frequency bands 2.4 GHz and 5 GHz In general, the 2.4 GHz channels are much cheaper, and for good reason. Unfortunately, you probably already have a number of devices in the home with 2.4 GHzFrequency band, including baby monitors, doorbells and wireless networks. These are all the video stations to make the image unwatchable interfere. The 5 GHz channels are better but still not perfect.
Wireless Video Sender (No Hi-Def) are useful as a quick fix, but suffer from the problems below;
- Interference from other devices
- Low resolution signal
- In general, single-source
- Wireless Video Transmitter (High Definition)
High-definition video sendersrelatively new and as such is still quite expensive at the time of writing we have only 2 models are available in the United Kingdom;
Marmitek GigaVideo 800
Gefen Wireless HDMI transmitter
Both models above are connected to input devices (to Sky HD, Blu-ray player that can connect simultaneously and so on.
The main problem with the above two devices is that they do not say "pass through" for a local TV station, there is no way to connect the TV in the living room on HD sources, such asand the sender without additional equipment, is the only way to use it for an HDMI splitter. This is mainly because these products are designed to be used in a room, the HD sources mounted on a wall, connect your TV or projector, where the wiring is a problem. In these scenarios, the performance of wireless HDMI Video Transmitter is very good and not suffering from a final low over as the sender.
Install Wired - Coax
This was generally the easiestMethod for distributing video throughout the home (especially Sky), as most homes are coaxial (antenna connections) in most rooms already. With Magic Eyes and Sky RF2 output on the back of Sky boxes, you can see the programming Sky in every room and be able to change the channel from the TV remote control. The main problem with a coaxial cable that is left is very old technology that has made the modern equipment is that you can not find a coaxial output on any DVD player let alone a Blu-rayPlayers.
Install Wired - HDMI
HDMI is without doubt the connection method of choice for high-definition video signals. It is a proven technology, with a range of connectivity products such as;
HDMI Switch - - connecting to multiple sources with an HDMI port.
- HDMI Splitter - to connect multiple TVs to one source, namely, living room and kitchen TV to the same source.
- HDMI Switcher Splitter - combining the functions of switches andSplitter.
- HDMI Matrix - These perform the same function as the switch described above, but you can see from various sources on TV in a different room in Bluray, Sky in the kitchen.
With a combination of the above devices, you can construct any distribution system HD to your home.
However, there are some problems with HDMI;
Cable Length - The maximum length of HDMI cable is realistic about 15m. For lengths over this HDMI Extenderbe used.
Cable Management - You can not create custom connectors HDMI cable, so be sure to buy the right length of cable and direct you to the terminals already connected. The other problem with the HDMI cable, they are pretty fat and hard (since they contain so many individual wires) is.
Install Wired - CAT5 / 6
CAT5 / 6 cable is the same type of cable, as used by networks of computers around the world. It is much easier to pass the HDMI cable and there isPlates and connectors freely accessible.
Route to high-definition signals over CAT5 / 6 HDMI you need CAT 5 / 6 HDMI Baluns this take on one end and then spit out a CAT5 / 6 compatible signal at the other end. At the other end in another BALUN CAT5 / 6 converts the HDMI.
deploy the main problem with using CAT5 / 6 HDMI signals-is that it is a solution point and you can not point to expand the number of recipients without running another length of CAT5 / 6 fromSource.
Install Wireless - TCP / IP (also known as HDMI-Over-IP unknown)
HDMI-over-IP can have the same advantages as CAT5 / 6 (ie use the same cables), but it is an excessive number of all solutions, ie a station more than one recipient server. This means that the system is expanded in the future, easy and cheap.
The author believes that the best way to screen video to be distributed around your home, use the HDMI connections for adjacent components (eg living rooms) and then with HDMIOver IP systems for longer distances.
An example of such a system may, in author's homepage you will find below an example.
Lounge
Bluray Player -> HDMI switcher
Sky + HD -> HDMI switcher
HDMI Switch -> TV & Transmitter HDMI-Over-IP
Kitchen
Receiver HDMI-Over-IP -> TV
Bedroom
Receiver HDMI-Over-IP -> TV
Kids Bedroom
Receiver HDMI-Over-IP -> TV
Therefore, anyTV in the house, showed what the living room TV. The HDMI-Over-IP solution allows the remote control signals back and travel along the network, which we channel out of the bedroom, etc. mean change
In the future we can Splitter HDMI Switcher HDMI to a matrix that will allow us to upgrade would be seen from different sources in different rooms.
If you install this or any other system, please go to HDMI4U easy to follow guides and the latest technologyaudio and video distribution.
Methods of home video distribution
SLR Digital Reviews Best Store Toy Online

No comments:

Post a Comment