The general direction of the description is the ready technologies, the standards that need to be applied to do installations and buyer Service. This is a general guide and there are many other aspects to consider, but hopefully, it helps to show you where careful notice needs to be when manufacture the decision to distribute High Definition and for you to get the right Hdmi law that will suit your needs completely.
Hdmi Versions:
Hdmi Tv
I do not want to bore with the technical. There are many separate Hdmi versions of Hdmi. They are: 1.1, 1.2, 1.2a, 1.3a, 1.3b, 1.3c and now 1.4. Just remember that South Africa is a late-comer to the high definition party. So what does that mean? Basically, when Hd Blu Ray and Hd Dstv were launched in Sa the Hdmi Version was 1.3b. Thus make sure all your tool is 1.3b, 1.3c or 1.4. Hdmi is backwards compatible with older versions of Hdmi.
Version 1.4 is the newest version and supports 3D Tv.
Hdmi Cables:
Hdmi cables are becoming one of the most base cables found in a household today. As Hd is a fairly new technology in South Africa there have been some misunderstandings that occurred with the South African Consumers. Firstly, there are many separate wire gauges and separate internal compositions. Don't worry about the compositions. Good ability copper cable will do the trick.
The important thing to remember is that an Hdmi Cable does not cost R 1000. The South African buyer has been mislead into reasoning that a R 1000 cable is good than a R 85 cable. This is not true, as the important thing to remember is longer Hdmi cables should use thicker wire. I personally propose and purchase gold platted 28 Awg Hdmi cables.
I have never had one that has failed and returned to me. The funny thing is that they look same to the Monster Hdmi cables.
Almost all Blu Ray and set top box manufacturers (Dstv Hd Pvr) contain Hdmi cables with the item and these are not suitable. These cables are of a lower grade and are fine for connecting directly to Hd Tvs if they are easily short (less than 1 meter). I have had to replace many of them in the past.
The only issue is that when it comes to distributing the signals to remote locations association issues do occur. So when purchasing a new Blu-ray just upgrade your Hdmi cable, but don't go overboard on what you pay for the Hdmi Cable. Distributing Hdmi signals with Hdmi Cables to many locations, like bedrooms and patios, is an issue as the Hdmi Connector is large and getting it though conduit is practically impossible. The second issue is that extending past a 10 meter distance may cause execution issues due to signal attenuation. This is why there are so many separate technologies offered to distribute to remote points.
Hdmi Splitters:
There are many separate types of Hdmi splitters and they come from various separate parts of the world. Hdmi Splitters split the signals in multiples of two. For example 1x2, 1x4, 1x8 and 1x16. This means that the splitter takes one Hd input and will split that input signal to 2, 4, 8 or 16 outputs. Households rarely use 1x8 and 1x16 splitters. These are the most base splitters that you will find.
New technologies have allowed for switches to be included in the splitters. Examples are: 5x2, 3x4 and 3x8 splitters. Note that these splitters are not Hdmi matrixes. They are just switch distribution amps. Meaning that you can only view one Hd input on one or many displays at any one time.
Hdmi Extenders:
Hdmi Extenders are the backbone of distributing to many locations. There are so many separate types and ranges it is practically impossible to distinguish between them. The most base you will find are the dual Cat5e extenders. These extenders work perfectly, but there are many issues that attribute to the execution of these extenders. One is the premise of these systems. I have been called out to many premise sites where the ability of the premise is the main presuppose for poor law performance, where a close second is the ability of the Utp (Cat) cable used. There are two types of dual Cat extenders, suitable extenders which distribute signals to 25 meters and super extenders up to 50 meters.
The benefit of using these types of extenders is that in the future one of the existing Cat cables (good quality) can be used to run the Hdmi signal and the other for Iptv and Home Video Networks.
Other extender options contain extending signals over one Cat cable (catone technology), costly at present, where the Hd signal is distributed over one Utp (Cat) Cable. Daily new Hd extender technology is released. Some of the new technologies on offer are fibre optic and coaxial extenders. These Hd extenders, in my opinion, are the technologies to use and watch out for.
One of the most new distribution techniques is distributing Hd over Ethernet (Ip) systems, I am not going to commentary much on this technology as I personally have not used or tested it, but I understanding that I would mention it. This is going to turn the distribution of Hd forever as I feel that all the video and audio technologies are keen towards Ip based systems.
Hdmi Matrix:
Hdmi Matrixes are the extreme in current Hdmi Technology. The flexibility of these systems is awesome. The most base of Hdmi matrixes are 4x4. This allows you to watch any full Hd source on any display in the system. Thus this unit manages which input is displayed at any one time. Newer Hdmi Matrixes have Cat6 boosted outputs and have extenders included in one unblemished package. These matrixes tend to be more costly as there is more processing involved. But for me, it is worth every penny spent. Hdmi Matrixes are more future proof than suitable splitters as when you need to add Hd sources at a later stage you can without further costs.
This also minimises the need for further items, such as Hdmi Switches, to add the Hd source into the distribution system.
Alternative to Hdmi:
Some installers are staying clear of Hdmi distribution systems as they may have had technical issues with these systems. Thus they opt for the distribution on component video (analogue Hd). Component video is fantastic, but the only real drawback is the cabling. Once you start distributing to more than one remote point it becomes a nightmare. This is because you need to have 5 cables (3 video 2 audio) at each point. It may be economy in some regards, but when you need to amplify the component video or put it into a matrix it tends to be pricy.
Choices Not Offered:
Now that we know what's out there, why is the buyer not offered the best solution? These technologies are not offered to the South African consumer. This allows the seller/installer to have carte blanch on the law without discussing it first with the client. This poses a bit of a problem for the South African buyer as they are not getting the right product for their requirements. This is a huge problem as this is not inspecting the future needs and will lead, in my opinion, to bad buyer service.
I have seen it so often where a law is thrown together and later the client needs to turn his/her law just to handle a new Tv or Hd Source. This leads to more costs involved. Thus the installers love it as this means more sales and more call outs but this, for me, just tarnishes the industry.
A fair warning is that there are some installers who charge by what car you drive and not your needs. So my advice is that you study and call around before accepting any quotations. Get a feel for what you need and you will save money in the future. A limited study into Hdmi distribution is not a huge effort. There are millions of forums and buyer write-ups on all the tool that is available. I am sure that Hd Football can wait a week. Be patient.
Hdmi Price Factors:
Hdmi tool varies in price dramatically. Thus it's important to know why. Main Factors that sway prices are: place of manufacture, video processor chips, and build quality. Place of invent is important as this will dictate how much assistance is ready to you.
For example, assistance turnaround times on repairs and post purchase service.
Most Hdmi tool distributors import their goods from China. It is important to remember that if something goes wrong with the equipment, this may in fact cost a lot more than you realise. The shortfall with buying this tool is that fix services are nonexistent, which is illegal in South Africa. This is why we have fix facilities at Fonet.
One other problem is build quality. I have found a few Chinese business that build great Hdmi products and others that do not and are rubbish.
A good point to remember is when you are shopping and are on a tight budget, ask where it is made. A good general rule is that Taiwan invent is great. The tool and build ability is excellent. Hdmi tool built in the Usa, is very costly but the build ability is good. One other factor to keep in mind is shipping from the Usa is extremely costly and this drives the tool cost up.
If the tool is assembled in China under licence, the ability control is fantastic.
Beware, I had an incident with an American enterprise a few months back. Their assistance was shocking. I was looking at one of their systems and wanted to know if I could buy some extra spares for backup assistance here in South Africa. The reply was "buy 2 systems, if something goes wrong then replace it with the spare". Keep in mind that I was sourcing tool for one big installation. I only required one unit. The unit cost 6000 Us, buying two was not an selection for "if something went wrong" and secondly I would make no money on the deal if I had bought two. Bad enterprise sense if you ask me.
As far as I am aware, and we do keep a close eye, there are three main manufacturers of the video chips. These are namely, explore Electronics (Taiwan), Maxim (Usa) and Sony (Japan). Try and find out what chips are being used, for assistance reasons, as some are easier to get hold of than others. These chips range in price from 80 rand (10 Usd) to about 150 rand (21 Usd). Maxim chips are the easiest chips to get hold of as they have representation in South Africa. explore chips have to be imported and we personally have not found a supply of Sony chips in South Africa or around the world.
Cat6 Cable:
This is one of the most important items to know about when you are reasoning about distributing Hd to remote points. The law margin of error free execution depends on it. I only propose Cat6 Cable. For the extra 1 or 2 rand per meter it's worth every cent. There are many grades of Utp cables. My brand preference is Lambda and Le Grand. Utp Cat6 Solid should range about R 4 to R 7 per meter.
This is where so many installers and distributors of Hdmi tool come short. They use Cat5e which for Hdmi is not great. It works but the law margin is bad, photograph drop outs and pink screens. Most of your problems can be solved with just using Cat6 cable (good quality). Installing extra Cat6 Cables is a great idea for future upgrades. It is even good to use Shielded Cat6 (Ftp) to avoid mains interference and if you are laying Cat6 cables outside.
A word of caution, this cable is very expensive. Expect to pay whatever from 15 - 35 rand per meter, depending on greed.
Best way to distribute Hd signals:
The best way to distribute Hd is "requirement based", contribution various solutions for the client's needs to ensure that all requirements are met and future upgrade paths are available. All systems eventually will be replaced but you can proof yourself for between 5-10 years. It's just good to get what you want now and avoid the fiddle later.
Short falls of Hdmi:
Sometimes I do not like Hdmi technology as there are a few invent issues. The first one is Hdcp (High-bandwidth Digital content Protection). This is there to stop recording on external recording devices. This causes handshake issues and can make life difficult. I have never had issues with Blu ray players, but with the Dstv Hd Pvr I have had many. I don't think that the Pvr manufacturers stick to the Hdmi invent Standards. The second issue is having power on the Hdmi. This makes it very susceptible to lightning.
The great thing is with fibre optic cable and coax cable the power element cannot be passed through, reducing lightning issues.
Lightning Protection:
Lightning security is imperative to have in any Hdmi system. There are two areas where the lightning can leak into the law is the mains (Ac) and on the Cat6 Cable. The best practice for security on the Ac mains it to use surge and lightning security units. The whole law needs to be protected. Thus all components such as Tv, Dstv decoder, Hdmi splitters and extenders must have protection.
The brands that I propose are Clearline and Apc. The only security on Cat6 Cables is using shielded cat6 cable. Lan lightning security does not work. The margin for errors is large as there are huge speed differences between Lan and Hdmi.
Recommendations:
1. Do some research, make some calls, speak to lots of separate people, get an idea of what budget to set on what you require.
2. I easily think that paying a limited extra will save you in the long run.
3. Proof yourself for the future as best you can.
4. All the time use Cat6 cable!
5. There are so many resources at your disposal use them and you will be laughing.
6. If you are unsure of premise quality, ask someone!!!
7. All the time ensure that you are protected against lightning.
For more info and advice email us on sales@fonet.co.za
Enjoy your Hd
Choices in Distributing High Definition (Hdmi)
No comments:
Post a Comment